Pipe Flanges

Our organization offers a wide range of Blind Flanges and Stainless Steel Blind Flange, which is widely used to close ends of piping systems. These Blind Flanges are round plate with no center hold but with all the proper bolt holes. We offer our range of Blind Flanges in various sizes and material, which is used to provide positive closer on the ends of pipes, valves, or equipment nozzles. The Blind flanges also help in easy access to a line once it has been sealed. These Blind Flanges are available in custom made finishes or in standard sized pipe to which reduction is being made. Further, this reduction can be a threaded reduction or welded reduction.

Material Used

• Stainless Steel
• Nickel Alloy
• Titanium
• Carbon Steel
• Cast Iron
• Brass
• Bronze
• Steel
• Aluminum
• Polypropylene
• Silicone
• PVC

FEATURES

• Blind flanges are sometimes supplied with NPT fittings which allow pressure test
• Connections to be fitted
• These are used to blank off the ends of pipe
• Used to blank off the ends of valves and pressure vessel opening
• Considering factors like internal pressure and bolt loading, blind flanges, especially in the larger sizes, are the most highly stressed of all types of flanges
• Since the maximum stresses in a blind flange are bending stresses at the center, these can safely be allowed to be higher than in other types of flanges
• Blind flanges are made to fit standard pipes in all sizes

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING

We offer an extensive range of Slip on Flanges, which is a very popular type of pipe flanges. These flanges slide over the end of piping and then welded in place, ie Welding Slip On Flanges. Slips on Flanges are perfect for lower pressure applications and can be easily fitted & welded into different pipes. The welding helps to reduce the fabrication costs of these pipes. We offer our range of Slip On Flanges, Slip On Pipe Flanges and Welding Slip On Flanges in wide variety of sizes for various applications.

Material Used
Common Material Used Is as Follows

• Stainless steel
• Plastics
• Titanium
• Brass
• Steel
• Aluminum
• Monels
• Alloy Steel
• Carbon steel
• Alloy titanium

Feature

• These are generally not preferred for high pressure temperature environments
• One size fits all pipe schedules
• The smaller thickness of this flange allows for easier alignment of bolting holes
• Fabricators can more easily cut pipe to flanges length for slip-on flanges

Advantages of Slip On Flanges 

• Low cost installation
• Less time needed to spent on ensuring the accuracy of the cut pipe
• They are easier to align
• The slip-on flanges have low hub because the pipe slips into the flange before welding
• The flange is welded both inside and outside to provide sufficient strength
• Prevent leakage

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• Hot Dipped Galvanizing
  
• Heat Treatment
  
• CNC Machining
  
• Threading
  

The wide range of Weld Neck Flanges and Stainless Steel Weld Neck Flanges offered by us is procured from trusted vendors, who manufacture it as per the set industry standards. These Weld Neck Flanges have heavy welded neck, which is hot formed from a circular section of steel plate having a small co-axial hole in the center.

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING

With our expertise in the respective field, we are engaged in offering an extensive range of Socket Welding Flanges. These Socket Weld Flanges are a device, which is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. Our range of socket weld flanges helps to disconnect or reconnect the pipe with ease. We offer these Socket Weld Flanges in variety of shape and sizes, which is known for their durability and high performance.

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• Hot Dipped Galvanizing
  
• Heat Treament
  
• CNC Machining
  
• Threading
  

We offer our clients Lap Joint Flanges and Stainless Steel Lap Joint Flange, which are procured from reliable and trusted vendors. These Lap Joint Flanges find extensive application in steel plants, refineries, ship building, and chemical industries. Our range of Lap Joint Flanges is generally used in applications to facilitate bolt alignment that eases the erection of large diameter or unusually stiff piping.

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING

Our extensive range of Long Weld Neck Flanges is used in general piping, refineries, and other related industries. These Long Weld Neck Flanges are procured from authentic vendors, who are selected on the basis of their market credibility. Our Long Weld Neck Flanges are appreciated for salient attributes such as corrosion resistance, high tolerance, and longer functional life.


Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING

The wide range of Spectacle Flanges offered by us is available in quality stainless steel and alloys. We offer our range of Spectacle Flanges in various technical specifications and in forms of slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank and screwed boss. Besides, this we can also provide customization facility as per demands of our clients.

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING

Our organization is involved in offering a wide range of Ring Joint Flanges, which is highly durable, resistance to heat, and has the ability to withstand any amount of stress. These Ring Type Joint Flanges are used in automobiles, and engineering related industries. We offer our range of Ring Joint Flanges in various dimensions and other technical specifications as per the specific requirements of our customers.

Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING

We offer a comprehensive range of Orifice Flanges and Orifice Plate Flanges, which is used for measuring the flow rate of either gases or liquids in the respective pipeline. These Orifice Flanges are available in various sizes, shapes, and dimensions. We ensure to test our range on well defined parameters at our own premises to deliver flawless products.


Range
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6,10,16,25, 40,64,100,160 ETC. Available with NACE MR 01-75

Stainless Steel
Grade : 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430L

Duplex Steel
Grade : 2205 (UNS No. S31803), 2507 (UNS No. S32750)

Nickel Alloy
Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade : UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Standard

• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10
• OTHER : PLATE, PLATE BLANK

Value Added Services

• HOT DIPPED GALVANIZING
• HEAT TREATMENT
• CNC MACHINING
• THREADING